Travertine pavers are a popular choice for patios, pools, and outdoor living spaces thanks to their natural beauty and long-lasting durability. But like any outdoor surface, they collect dirt, algae, and debris over time — which leads many homeowners to ask:
Can you pressure wash sealed travertine pavers?
Yes, you can — but only if it’s done correctly.
Because travertine is a porous natural stone, improper pressure washing can damage the surface, wear down the sealer, or even cause pitting. To keep your pavers looking their best, follow these guidelines.
✅ Best Practices for Pressure Washing Sealed Travertine
-
Use low pressure — no more than ~1200 PSI
High pressure can strip the sealer and erode the stone. -
Use a wide spray tip (25° or 40° nozzle)
Avoid pinpoint jets that dig into the stone. -
Keep the wand moving
Don’t hold the spray in one spot. -
Use a gentle cleaner made for natural stone
Avoid acidic cleaners — they can etch travertine. -
Rinse thoroughly
Make sure all soap and residue is removed.
A professional surface cleaner attachment (flat, circular unit) is ideal because it applies even pressure without leaving streaks.
⚠️ What to Avoid
-
No high-pressure concentrated streams
-
No bleach or vinegar
-
No harsh degreasers not labeled for stone
-
Avoid blasting out sand in the joints
-
Avoid pressure-washing right after sealing (allow 24–48 hours cure time minimum)
Using the wrong technique could remove the sealer and make the stone more vulnerable to stains and weathering.
💡 When Should You Re-Seal After Pressure Washing?
If the water no longer beads up on the surface after cleaning, it’s time to re-seal.
Most sealed travertine pavers need resealing every 1–3 years, depending on:
-
Sun exposure
-
Foot and water traffic
-
Type of sealer used
-
Local weather conditions
A good penetrating sealer will help maintain color, reduce stains, and protect against moisture.
✅ Final Answer – Can you pressure wash sealed travertine pavers?
Yes — you can pressure wash sealed travertine pavers safely as long as you:
✔ Keep the pressure low
✔ Use the right nozzle and cleaner
✔ Protect the sealer and stone surface
Done correctly, pressure washing is one of the best ways to keep travertine looking clean, fresh, and beautiful for years.